Cisco

CCNA 200-301 Pearson uCertify Network Simulator

  Enroll in our CCNA 200-301 Network Simulator today and open doors to exciting new opportunities.

(200-301-SIMULATOR.AB1) / ISBN : 978-1-61691-837-8
Lab
43 Reviews
Get A Free Trial

About This Course

The Pearson uCertify Network Simulator is an interactive online training platform designed to provide you with hands-on experience and practical knowledge in networking. This simulator offers a realistic environment where you can experiment with various network configurations, troubleshoot common issues, and reinforce your key concepts. All labs are perfectly aligned with Cisco CCNA 200-301 exam objectives.

Skills You’ll Get

  • Understand and configure network topologies, including routers, switches, and end devices
  • LearnIPv4 and IPv6 addressing, subnetting, CIDR, and addressing schemes 
  • Configure and troubleshoot routing protocols like OSPF
  • Configure switches for VLANs, inter-VLAN routing, and trunking 
  • Set up and manage wireless LAN controllers and networks 
  • Create and apply ACLs to control network access
  • Implement security features such as port security, DHCP snooping, and dynamic ARP inspection 
  • Identify and resolve network connectivity issues using ping and traceroute 
  • Apply troubleshooting methodologies to diagnose and fix network problems
  • Configure NTP for time synchronization and set up NAT to translate private to public IP addresses
  • Configure and manage network devices using CLI

Download Course Outline

1

Foundational Networking Technologies

  • New Job I
  • Subnetting and Addressing I
  • Subnetting and Addressing II
  • Subnetting and Addressing III
  • IP Addressing and Configuration I
  • IP Addressing and Configuration II
  • Rebuild a Configuration
  • SSH and Telnet
  • Router CLI Exec Mode I
  • Router CLI Exec Mode II
  • Router CLI Configuration Process
  • Interface Status V
  • Interface Status VI
  • Loopback Interfaces
  • Configuring SSH
  • Setting Router Passwords
  • IPv4 Addressing Troubleshooting
  • Path Analysis IV
2

IPV4 Addressing

  • IP and MAC Address Comparisons
  • Configuring Router IP Settings
  • IP Address Configuration II
  • IP Address Configuration III
  • IP Address Configuration IV
  • IP Address Configuration V
  • IP Address Configuration VI
  • IP Address Configuration VII
  • Connected Routes
  • Subnet Zero I
  • Subnet Zero II
  • Subnet Zero III
  • Subnet ID Calculation I
  • Subnet ID Calculation II
  • Subnet ID Calculation III
  • Subnet ID Calculation IV
  • Subnet ID Calculation IX
  • Subnet ID Calculation V
  • Subnet ID Calculation VI
  • Subnet ID Calculation VII
  • Subnet ID Calculation VIII
  • Subnet ID Calculation X
  • Subnet ID Calculation XI
  • IP Address Rejection I
  • IP Address Rejection II
  • IP Address Rejection III
  • IP Address Rejection IV
  • IP Address Rejection IX
  • IP Address Rejection V
  • IP Address Rejection VI
  • IP Address Rejection VII
  • IP Address Rejection VIII
  • IP Address Rejection X
  • IP Address Rejection XI
  • IP Route Selection I
  • IP Route Selection II
  • IP Route Selection III
  • IP Route Selection IV
  • IP Route Selection IX
  • IP Route Selection V
  • IP Route Selection VI
  • IP Route Selection VII
  • IP Route Selection VIII
  • IP Route Selection X
  • IP VLSM Route Selection I
  • IP VLSM Route Selection II
  • IP VLSM Route Selection III
  • IP VLSM Route Selection IV
  • IP VLSM Route Selection V
  • IP VLSM Route Selection VI
  • IP VLSM Route Selection VII
  • VLSM Overlap I
  • VLSM Overlap II
  • VLSM Overlap III
  • VLSM Overlap IV
  • VLSM Overlap V
  • VLSM Overlap VI
  • VLSM Overlap VII
  • VLSM Overlap VIII
  • VLSM Overlap IX
  • VLSM Overlap X
  • VLSM Overlap XI
3

IPv6 Addressing

  • IPv6 Configuration I
  • IPv6 Configuration II
  • IPv6 Address Configuration I
  • IPv6 Address Configuration II
  • IPv6 Address Configuration III
  • IPv6 Address Configuration IV
  • IPv6 Address Configuration V
  • IPv6 Address Configuration VI
  • IPv6 Address Configuration VII
  • IPv6 Address Configuration VIII
  • IPv6 Address Configuration IX
  • IPv6 Subnet ID Calculation I
  • IPv6 Subnet ID Calculation II
  • IPv6 Subnet ID Calculation III
  • IPv6 Subnet ID Calculation IV
  • IPv6 Subnet ID Calculation IX
  • IPv6 Subnet ID Calculation V
  • IPv6 Subnet ID Calculation VI
  • IPv6 Subnet ID Calculation VII
  • IPv6 Subnet ID Calculation VIII
  • IPv6 Subnet ID Calculation X
  • IPv6 Route Selection I
  • IPv6 Route Selection II
  • IPv6 Route Selection III
  • IPv6 Route Selection IV
  • IPv6 Route Selection IX
  • IPv6 Route Selection V
  • IPv6 Route Selection VI
  • IPv6 Route Selection VII
  • IPv6 Route Selection VIII
  • IPv6 Route Selection X
  • IPv6 EUI-64 Calculation Drills I
  • IPv6 EUI-64 Calculation Drills II
  • IPv6 EUI-64 Calculation Drills III
  • IPv6 EUI-64 Calculation Drills IV
  • IPv6 EUI-64 Calculation Drills V
  • IPv6 EUI-64 Calculation Drills VI
  • IPv6 EUI-64 Calculation Drills VII
  • IPv6 EUI-64 Calculation Drills VIII
  • IPv6 EUI-64 Calculation Drills IX
  • IPv6 EUI-64 Calculation Drills X
  • IPv6 Addressing Troubleshooting
  • IPv6 Routing
4

Ethernet Switching

  • Switch Interfaces and Forwarding
  • Switch IP Connectivity
  • Switch CLI Exec Mode
  • Switch CLI Configuration Process I
  • Switch CLI Configuration Process II
  • Testing Using Pings with Hostnames
  • Comparing Configuration Files
  • Configuring Hostnames
  • Interface Status I
  • Interface Status II
  • Interface Status III
  • Interface Status IV
  • Switch Forwarding I
  • Configuring Local Usernames
  • Terminal History I
  • Terminal History II
  • Switch IP Address
  • Switch IP Connectivity I
  • Configuring Switch IP Settings
  • IP Address Configuration I
  • Setting Switch Passwords
  • Interface Settings I
  • Interface Settings II
  • Interface Settings III
  • Cisco Discovery Protocol (CDP) Configuration I
  • Cisco Discovery Protocol (CDP) Configuration II
  • Link Layer Discovery Protocol (LLDP) Configuration I
  • Link Layer Discovery Protocol (LLDP) Configuration II
  • Network Discovery I
  • Network Discovery II
  • Configuring VLANs
  • VLAN Configuration I
  • VLAN Configuration II
  • VLAN Configuration III
  • VLAN Configuration IV
  • VLAN Configuration V
  • VLAN Configuration VI
  • VLAN Configuration VII
  • Topology Analysis
  • Switch Forwarding Troubleshooting
  • Path Analysis I
  • VLAN Troubleshooting
  • Path Analysis II
  • Router-on-a-Stick to MLS I
  • Router-on-a-Stick to MLS II
  • VLAN Trunking I
  • VLAN Trunking II
  • Router-on-a-Stick Configuration I
  • Router-on-a-Stick Configuration II
  • Router-on-a-Stick Configuration III
  • Router-on-a-Stick Verification I
  • Router-on-a-Stick Verification II
  • MLS Configuration I
  • MLS Configuration II
  • MLS Configuration III
  • MLS IPv6 Configuration I
  • MLS IPv6 Configuration II
  • Trunking Configuration I
  • Trunking Configuration II
  • Trunking Configuration III
  • Trunking Configuration IV
  • Switch Security I
  • STP Analysis
  • STP Configuration
  • STP Prediction Drills I
  • STP Prediction Drills II
  • STP Prediction Drills III
  • STP Prediction Drills IV
  • PortFast Configuration I
  • PortFast Configuration II
  • BPDU Guard Configuration I
  • BPDU Guard Configuration II
  • STP Configuration I
  • STP Configuration II
  • Path Analysis III
  • STP Troubleshooting
  • Path Troubleshooting I
  • Static EtherChannel
  • Dynamic EtherChannel I
  • Dynamic EtherChannel II
5

Routing

  • Using and Suspending Telnet Connections
  • Ping
  • Traceroute I
  • Traceroute II
  • Traceroute III
  • PC IP Commands I
  • PC IP Commands II
  • PC IP Commands III
  • Static Routing I
  • Static Routing II
  • Configuring Default Routes
  • Static Routes I
  • Static Routes II
  • Static Routes III
  • Static Routes IV
  • Default Route I
  • Default Route II
  • OSPF Configuration I
  • OSPF Configuration II
  • OSPF Configuration III
  • OSPF Metric Manipulation
  • Interpreting the show ip route output
  • OSPF Router ID I
  • OSPF Router ID II
  • OSPF Metric Tuning I
  • OSPF Metric Tuning II
  • OSPF Metric Tuning III
  • OSPF Neighbors I
  • OSPF Neighbors II
  • OSPF Neighbors III
  • OSPF Neighbors IV
  • OSPF Neighbors V
  • OSPF Interface Configuration I
  • OSPF Interface Configuration II
  • IP Addressing and Routing
  • Path Troubleshooting II
  • IP Routing
  • OSPF Troubleshooting I
6

Wireless Networks

  • Configuring a Wireless LAN Controller (WLC) I
  • Configuring a Wireless LAN Controller (WLC) II
  • Logging into a Wireless LAN Controller (WLC)
  • Wireless LAN Controller (WLC) RADIUS server configuration I
  • Wireless LAN Controller (WLC) RADIUS server configuration II
  • Wireless LAN Controller (WLC) dynamic interface configuration I
  • Wireless LAN Controller (WLC) dynamic interface configuration II
  • Wireless LAN Controller (WLC) WLAN configuration I
  • Wireless LAN Controller (WLC) WLAN configuration II
  • Wireless LAN Controller (WLC) WLAN security configuration I
  • Wireless LAN Controller (WLC) WLAN security configuration II
  • Monitoring a Wireless LAN Controller (WLC) I
  • Monitoring a Wireless LAN Controller (WLC) II
7

Network Services

  • Configuring NAT I
  • Configuring NAT II
  • Configuring NAT III
  • NAT Configuration I
  • NAT Configuration II
  • NAT Configuration III
  • NAT Configuration IV
  • NAT Configuration V
  • NAT Configuration VI
  • NAT Configuration VII
  • NTP Configuration I
  • NTP Configuration II
  • NTP Configuration III
  • Terminal Monitor
  • Booting a New Router IOS
  • Migrating to a New IOS Image
8

Network Security

  • Securing VTY lines with an ACL I
  • Securing VTY lines with an ACL II
  • Securing VTY lines with an ACL III
  • Securing VTY lines with an ACL IV
  • Disabling HTTP/HTTPS access
  • Configuring a login banner
  • Configuring a MOTD banner
  • Configuring an EXEC banner
  • Switch hardening configuration I
  • Switch hardening configuration II
  • Standard ACL
  • Extended ACL I
  • Extended ACL II
  • ACL I
  • ACL II
  • ACL III
  • ACL IV
  • ACL V
  • ACL VI
  • ACL Analysis I
  • Named ACL I
  • Named ACL II
  • Named ACL III
  • Configuring Switch Security I
  • Configuring Switch Security II
  • DHCP snooping
  • Dynamic ARP inspection
  • Switch Security II
  • Switch Security III
  • Switch Security IV
  • Port security auto-recovery I
  • Port security auto-recovery II
  • DHCP snooping configuration I
  • DHCP snooping configuration II
  • DHCP snooping verification I
  • Dynamic ARP inspection configuration I
  • Dynamic ARP inspection configuration II
  • Dynamic ARP inspection verification I
  • Dynamic ARP inspection verification II
  • Path Troubleshooting III
  • Port Security
9

Network Programmability

  • Setting the Configuration Register
  • Ignoring the Startup-config File
10

Academic Labs

  • Basic Commands and the Command Line
  • Switch Configuration
  • Basic Switch Configuration and the Command Line Interface
  • Basic Router Configuration and the Command Line Interface
  • IP Addressing and Subnetting
  • Subnet Challenge
  • VLSM Route Selection
  • VLSM Overlap
  • IPv6 Address Configuration
  • IPv6 EUI-64 Calculation
  • IP Addressing Final Exam
  • IPv6 Address Troubleshooting
  • Router on a Stick
  • Static VLAN Configuration and Trunking
  • VLAN Configuration
  • Trunking Configuration
  • CDP/LLDP Configuration and Discovery
  • EtherChannel
  • STP Configuration
  • STP Prediction
  • Switching Final Exam
  • Troubleshooting VLANs
  • Troubleshooting Path Analysis
  • STP Troubleshooting
  • Configuring Static Routes
  • Routing OSPF
  • Routing OSPF, Load Balancing, and Metric Manipulation
  • Route Selection
  • Multiprotocol Switching (MLS) Configuration
  • Routing Final Exam
  • Troubleshooting OSPF
  • NAT/PAT Configuration
  • NTP Configuration
  • Access Lists
  • Switch Port Security
  • DHCP Snooping Configuration Assessment
  • Dynamic ARP Inspection Configuration Assessment
  • Security Final Exam
  • Troubleshooting I
  • Troubleshooting II
  • Wireless LAN Controller Configuration Assessment

Any questions?
Check out the FAQs

Have questions about our CCNA 200-301 Network Simulator course? Find the answers here.

Contact Us Now

CCNA 200-301 Network Simulator training, powered by Pearson and uCertify Partnership, is a hands-on skills enhancement tool designed to help you prepare for the Cisco CCNA exam and land a job as a network engineer.

This Pearson uCertify Network Simulator provides a risk-free, non-production environment where you can practice Cisco IOS commands and configurations.

While the simulator is designed to help you learn by doing, having basic knowledge of networking will be beneficial.

The simulator requires an internet connection and works on major browsers such as Chrome, Opera, Firefox, etc.

Excel Google’s Associate Cloud Engineer Exam

  Your path to successful completion of Google Cloud Certification begins here!

$159.99

Buy Now

Related Courses

All Course